Boom in the use of renewable energy sources: Local source

As lawyers working in the energy sector, we are increasingly encountering questions about local sources: what is a local source, how does it differ from a standard source producing electricity from renewable energy, and what are its advantages? Given the various challenges posed by the current energy crisis, it is not surprising that the possibilities of using local sources are no longer only being considered by large companies, but also by smaller businesses and households.

Local source according to the RES Support Act

The legal basis for a local source is contained in the provisions of Section 4b of the Support Act. Its definition states that it must be a facility that:

produces electricity from renewable energy sources (hereinafter referred to as “RES”). RES mainly includes solar, wind, hydro, and geothermal energy, bioenergy, landfill gas, and sewage treatment plant gas;

the electricity produced is used primarily to cover the own consumption of the consumption point identical to the transfer point of the local source;

the total installed capacity of the local source must not exceed the maximum reserved capacity of the consumption point where the local source is installed.

Among the characteristics of a local source, it should also be noted that the producer who generates electricity in a local source can only be an active consumer who has concluded a contract with the distribution system operator for the connection of the local source to the distribution system.

It is precisely the position of active consumer that creates the fundamental difference between the regime of a normal production facility (in practice, the term “parallel source” is also used) and the regime and possibilities of a local source.

Within the meaning of Section 4(6) of the Energy Act[3], an active consumer is an end consumer of electricity[4] or a group of jointly acting end consumers of electricity who (i) consume or store electricity produced in their production facilities, (ii) supply their own generated electricity, or (iii) provide flexibility, whereby none of the above activities performed by a specific consumer may constitute their main business activity.

At the same time, an active consumer is always a household electricity consumer or a legal entity established for non-business purposes that performs at least one of the above activities. In other cases, only an end consumer whose income from the above activities does not exceed the total income from any of their other business activities for the last accounting period can be considered an active consumer.

Main advantages of local sources

Local sources have been part of national legislation since 2018 and are linked to Europe-wide efforts to expand and simplify the use of renewable sources across sectors, from households to large industrial enterprises. Since its introduction by Amendment No. 309/2018 to the Support Act, the legal regulation of local sources has undergone several significant changes, resulting in the removal of some restrictions compared to the original regulation, thus making the local source regime more attractive.

One of the main changes was undoubtedly the removal of the limit on installed capacity, below which a facility could be considered a local source, which had been set at 500 kW until 2022. Currently, this restriction no longer applies, and the only “size” limit is the aforementioned maximum reserved capacity of the local source’s consumption point, which is agreed upon in the connection contract for the local source and which must not be exceeded.

There are several reasons why electricity producers are turning to local sources. The indisputable advantages include, in particular, certain administrative relaxations, but also financial benefits that apply in the connection process or during the actual operation of the local source. These include:

priority and free connection to the distribution system;

free meter replacement;

exemption from paying the system operation tariff (TPS) on electricity produced, with the exemption applicable to a maximum of 1,000 MWh per year. To apply for this exemption, the producer must have a certificate of electricity production from a local source issued by the Regulatory Office for Network Industries (hereinafter referred to as “ÚRSO”). On the other hand, please note that the exemption does not apply to the payment of the system services tariff (TSS);

exemption from the obligation to obtain an opinion on the reserved capacity from the distribution system operator to which the local source is connected, if the total installed capacity of the facility is a maximum of 100 kW and if the electricity produced will be used exclusively for own consumption (i.e. no part of the electricity produced will be supplied to the grid). However, it should be noted that even in this case, the producer must conclude a connection agreement with the relevant distribution company.

In addition to the above-mentioned advantages, we would also like to point out the possibility for the producer to apply for a guarantee of origin of electricity. The guarantee of origin is issued by the Short-Term Electricity Market Organizer (hereinafter referred to as “OKTE”) at the request of the producer and, pursuant to Section 8a of the Support Act, serves to prove that the electricity was produced from a source specified in the guarantee (in the case of a local source, this means a specific renewable source). The producer may claim the guarantee of origin from the consumer for a period of 12 months from the date on which the electricity was produced, or may trade it by transferring it to another market participant in accordance with the rules set out in the OKTE Operating Rules.

However, the guarantee of origin may also be used for the purposes of exemption from excise duty within the meaning of Act No. 609/2007 Coll. on excise duty on electricity, coal and natural gas. In this context, we would like to point out that the amendment to the Support Act No. 363/2022 Coll. removed the condition under which guarantees of origin were issued only to producers who supplied part of the electricity they produced to the grid. This means that, under the current legislation, it is possible to apply for a guarantee of origin even if the local source produces electricity only for its own consumption and does not supply any surpluses to the grid.

In the context of the advantages of a local source, it should also be noted that the local source regime cannot be combined with support in the form of a surcharge, supplement, or mandatory purchase.

Practical use of a local source

As its definition suggests, a local source is primarily intended to meet the needs of its consumption point, i.e., for its own consumption of the electricity produced. In addition, however, a local source may also supply any surplus electricity produced to the grid.

In the past, it was possible to supply electricity from a local source up to a maximum of 10% of the total installed capacity of the facility, and if this limit was exceeded in two consecutive quarters of an hour, the distribution system operator could disconnect the local source from the grid without any claim for damages. Currently, the only legal limit on the amount of electricity supplied is the maximum reserved capacity of the local source, with the operator’s option to disconnect the facility from the grid in case of exceeding this limit remaining in place.

If an electricity producer in a local source plans to supply electricity to the system, please note that such supply must always be secured by contract. Without the relevant contract, the supply of electricity would be unauthorized under Section 46a of the Energy Act, which would expose the producer to the threat of sanctions from the grid operator, as well as the obligation to compensate the operator for any damage.

The effective legal regulation gives the producer the possibility to adjust the terms of supply through a standard electricity supply contract, but also through a contract for the purchase of electricity from renewable sources. The latter contract is a so-called power purchase agreement (PPA contract) – a type of contract that was introduced into national legislation by the transposition of Directive (EU) 2018/2001 on the promotion of the use of energy from renewable sources, whereby the consumer undertakes to purchase electricity from RES directly from the producer. However, according to our information, this type of contract has not yet found practical application in Slovakia.

For the sake of completeness, we would like to add that, in addition to self-consumption and supplying electricity to the consumer, the producer of electricity from a local source has other options for what to do with the electricity produced. They can store the electricity they produce, supply electricity to the energy community of which they are a member, or share electricity with another end consumer or energy community (of which they are a member). They can also offer flexibility on organized electricity markets or provide ancillary services – all of this, of course, after meeting the conditions set out in the relevant regulations.

Before we start generating electricity from a local source

Before a specific local source project can be implemented, it is necessary to:

ensure that activities within the local source (production and supply of electricity) are carried out legitimately;

determine whether there is sufficient capacity to connect the local source to the grid.

The first point relates to the authorization to conduct business in the energy sector. The production and supply of electricity is generally considered to be a business in the energy sector that requires a license. However, the Energy Act distinguishes cases where a license is not required and only a notification of the activity to the Regulatory Office for Network Industries (ÚRSO) is sufficient.

In the case of a local source (where the electricity producer is also an active consumer), the production, supply, or storage of electricity in a facility with an installed capacity of up to 1 MW is not considered an energy business. However, even in this case, the producer is obliged to notify the Regulatory Office within 30 days of the start, termination, or change of the activity performed, as a result of which the Regulatory Office will issue a confirmation of compliance with the notification obligation.

If the installed capacity of the local source exceeds 1 MW, the producer is required to apply for an energy business license for the specific activity they wish to perform (production, supply, storage). The law makes the granting of a license conditional on proving the technical requirements of the facility or the criteria for the person responsible for performing the activity at the local source.

A necessary prerequisite for the construction/installation of a local source is, of course, sufficient free capacity for connection to the desired distribution system. The Slovak electricity transmission system regularly updates the volume of used and free connection capacity of individual regional distribution systems on its website, specifically for local sources.

Actions necessary for the implementation of a local source

Provided that there is sufficient capacity in the system and that it is not a so-called island operation, the local source is connected to the distribution system (regional or local) on the basis of a contract for the connection of the local source to the distribution system. Operators of regional distribution systems (Západoslovenská distribučná spoločnosť, Stredoslovenská distribučná spoločnosť, and Východoslovenská distribučná spoločnosť) publish a model connection agreement on their websites. Please note that the specific commercial and technical conditions for connecting a local source vary slightly between operators.

However, the Support Act defines certain requirements for the process of connecting a local source that are generally applicable.

One of these is the obligation of the applicant for connection of a local source to obtain the opinion of the distribution system operator on the reserved capacity for connection of the local source (except for equipment up to 150 kW that will not supply the electricity produced to the system).  The distribution company is obliged to issue its opinion within 15 working days of receiving the request, and it is valid for 12 months from the date of issue. The law also provides for cases where the implementation of a local source also requires a certificate for the construction of energy equipment pursuant to Section 12 of the Energy Act, issued by the Ministry of Economy of the Slovak Republic. If this certificate is issued within 6 months of the issuance of the opinion on the reserved capacity, the validity of the opinion is extended by the period of validity of the certificate.

The applicant is then required to prepare project documentation for the connection, which is approved by the relevant distribution system operator within 30 days, and to build (or install) the local source within 12 months of the opinion being issued (or until the certificate for construction expires).

The operation of the local source can only be started after the conclusion of a contract for access and distribution of electricity within the meaning of Section 26(5) of the Energy Act, after the issue of responsibility for deviation has been settled, and after a successful functional test has been performed. Please note that, in practice, the producer is also required to send a notification of the operation of the local source to the distribution system operator.

For the sake of completeness, we note that in addition to the regional distribution system, it is also possible to connect a local source to the local distribution system (hereinafter referred to as “LDS”). In such cases, the law has introduced an obligation for each connection of a local source to the LDS to be reflected in the connection agreement concluded between the LDS and the superior regional distribution system.

It is also important to note that, in addition to the above-outlined connection process, the operator of a local source is also subject to obligations arising from building legislation and environmental protection legislation. From the perspective of building regulations, the obligations vary depending on whether it is a local source installed on the roof/perimeter of the building envelope (e.g., solar panels) or a structure on the land. From the perspective of environmental regulations, in some cases it is necessary to carry out an environmental impact assessment (EIA) in the form of a so-called screening procedure or even a mandatory assessment (so-called large EIA) for more demanding projects.

Local sources are an increasingly attractive form of electricity generation, which, due to their more flexible regime and lower administrative and financial burden, make the use of renewable sources accessible to smaller companies and households as well. In addition, given the growing opportunities for use, interest in it is likely to increase thanks to the development of community energy, PPA contracts, and electricity storage. However, the potential of local sources can, of course, only be realized if distribution companies ensure sufficient free connection capacity.

AUTHOR: VLADIMÍRA MURAVSKÁ, AK POLÁČEK & PARTNERS s.r.o.

Smart Energy Forum SK 2027
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.