We recommend: I’m not rich enough to buy a cheap solar power plant?

“The quality of photovoltaic power plants should not be underestimated. Mistakes are unforgivable, and direct current has the potential to kill,” says photovoltaic expert Jan Mastný, Head of Global Sales at Studer Cables AG, who will give a lecture on Tuesday, March 28, 2023, in Bratislava at the Smart Energy Forum professional workshop.

You have been working in the photovoltaic industry for almost 20 years. In your opinion, what are the three most common mistakes in photovoltaic power plants (PVPPs) that you have encountered during your career?

The first and absolutely crucial point is staff qualifications. Companies (seemingly logically) focus on teaching people how to properly install PV systems, but they rarely tell them why the procedure is the way it is and what the consequences of not following the procedure can be. I still see the same mistakes during installations – walking on modules, carrying panels by the cables from the j-box, using unsuitable tools for installation, and so on.

The problem is that the damage caused by unprofessional PV installation often only becomes apparent over time. Sometimes even years later. And only then, when the installation is no longer covered by the basic 24-month warranty or (as is also quite common) the supplier no longer exists, does the real headache begin.

I would add a “sub-point” to point 1, which is a situation where the installation company knowingly cuts corners on quality control and circumvents the principles of proper installation in various ways in order to save costs. This also happens, and companies that do this usually rely on the fact that defects will only become apparent after a long period of time, and the quality of the burden of proof therefore decreases.

The second phenomenon, which occurs relatively often, is the fact that companies often do not check their material suppliers. Or, to be more precise, large, global companies usually do this, and in the case of smaller or even regional companies, I would understand that this is a bit problematic. It is clear to me that when someone builds one or two roofs on a family home, they will not visit all the manufacturers of the panels they use.

However, the fact remains that it is desirable to find out as much as possible about suppliers (in the context of their size). It can be compared to a chef who does not know who supplies him with ingredients and does not care about the careful selection of his suppliers. A wild boar goulash from a poacher may look the same, but if the meat tastes the same too, yet, God forbid, is full of all kinds of parasites, the consumer will only discover this when it is too late.

I don’t want to point fingers at anyone, but there is at least one relatively significant supplier in the Czech Republic that offers panels from an unnamed Austrian company. Anyone who takes the trouble to find out will discover that the company in question has already gone through insolvency proceedings twice (which in itself should be a sufficient warning). In addition, some model series from this Austrian supplier had huge technical problems, which is why the manufacturer had to withdraw the products from the market. And finally, Austria is not so far away, and going to see the production facilities would take your breath away.

The third issue is the selection of materials that may be of high quality but are completely unsuitable for the purpose. This is mainly an issue in connection with floating PV plants, where companies completely ignore the fact that water surfaces simply pose certain risks and cannot be viewed in the same way as conventional PV plants in terms of the selection of materials and components.

Similarly, I can add, for example, the use of BIPV in places that are completely unsuitable for it. In many cases, this is a matter of expediency – an effort to save money. However, this can often result in faster degradation of the power plant, which, in addition to financial damage, can also cause damage to property or human lives.

What criteria should “enlightened investors” use to select suppliers of PV components? Or is it enough to just “look” at the datasheets?

First and foremost, it must be said that the selection should be equally careful for all suppliers. As many investors in photovoltaics have already discovered, the quality and performance of a power plant are only as good as its weakest link.

It is important to keep in mind that the target service life is 25 years or more for products that, for the most part, have not even been on the market for 25 years. This in itself represents a risk.

You will be better able to manage the risk if you share it with someone who has a long-term vision and who cares about retaining customers beyond the aforementioned 25 years. It is crystal clear that anyone thinking in terms of decades must invest enormous resources in production processes, quality, and the development and growth of the company.

This is not a small amount of money, and it must inevitably be reflected in the price. Of course, I do not want to encourage investors to buy the most expensive products (this does not necessarily lead to success), but it is necessary to take into account that prices will be higher than those often presented in projects where the price is too low at first glance.

For example, it is necessary to select companies that have a good reputation in the market, have a strong financial background and can withstand any market fluctuations, as well as companies that are innovative and treat their customers well.

Truly responsible investors conduct audits of supplier companies or hire an agency to do this work on their behalf. There are many such agencies on the market.

And studying datasheets? A matter of course! And not only that – it is necessary to verify that what is written there corresponds to reality. Some suppliers entrust their datasheets to marketers who write unbelievable nonsense.

And again, not everyone is an expert on everything. If I don’t understand what’s written there, I don’t hesitate to contact an expert or a company that is able to assess the matter competently.

Thanks to the return of the huge solar energy boom, many investors believe the “myth” that installing a power plant is “easy,” and therefore it is not necessary to look for a reliable installation company. What do you think about that?

In the introduction, we said that the vast majority of problems with PV installations are caused by (un)intentional sloppiness. This means that choosing the right contractor is absolutely crucial to the success of the entire project.

I understand that an ordinary citizen who wants to put a few panels on their roof does not have the same options as an investor who invests heavily in PV and hires entire teams of consultants. And an endless list of references may not necessarily be entirely reliable.

I would probably tell a layman that the number of questions asked by both sides is a good start. If a contractor makes you an offer based on a photo of your house on Google Maps without saying a word, something is wrong. It is important to ask about your consumption, lifestyle (from an energy perspective), plans for the future (for example, if you are planning to build a swimming pool or buy an electric car), and so on.

And when they come to you with a proposal, you, on the contrary, have to start asking questions. Why these panels and not others, why is it necessary/unnecessary to have battery storage, why, why, why…?

Only then should you start studying references, the company itself, and so on. And thank God for Google – if you know how to search CORRECTLY, you can learn a lot.

And one more note specifically for the Czech Republic: I sometimes come across so-called popularizers of photovoltaics in the media who (perhaps unintentionally) give the impression that a PV installation is something that even a skilled handyman could tackle. Keep in mind that photovoltaics does not forgive mistakes, and direct current has the potential to kill.

There are certainly investors in photovoltaics who buy the cheapest components from “unknown e-shops.” How can this affect the quality of the materials supplied and, consequently, their investment in PV systems?

First of all, it must be said that it is not common for investors to be interested in buying the cheapest possible components. Investors are interested in getting the most profit from their investment. Unfortunately, investors often group together with people/companies who have no idea about PV.

The one who usually pushes prices down is the contractor, because they are given a certain budget to work with, and if they can obtain some materials more cheaply, the difference goes into their pocket. However, it should be noted that the entire PV market is so distorted that contractors often do not have an adequate margin under normal circumstances, forcing them to resort to dishonesty.

And the consequences? Significantly higher OPEX (i.e., operating costs). Shortened power plant lifespan (= reduced revenues). Significantly reduced power plant performance (= reduced revenue). Compensation for damages incurred by third parties. Damage to property and health. A combination of several possibilities.

Add to that, for example, disputes with authorities, lawsuits, frayed nerves, and a host of other collateral damages that often arise.

And when you look at it a little more comprehensively, it often leads to disillusionment, a loss of confidence in photovoltaics, and we all know what effect such a “scandal” has when it is aired on television or at a pre-election rally.

You can discuss the quality aspects of PV systems with Jan Mastný on Tuesday, March 28, 2023, in Bratislava at the Smart Energy Forum expert workshop.

Smart Energy Forum SK 2027
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.